Eagle Dual Pressurized Flush Mount HUD Kit

Angle of Attack Indicator, for precise and instantaneous lift alerts for your aircraft.

SKU: DSTR-AOA-9600DPK-(HUD) Categories: , , Tag:



The Pressurized Dual Eagle kit has two chevron style displays and two HUD adapters. With the chevron display, when you come in for a landing you want to fly to the blue donut (on speed for landing). Should you come in with too low of an angle of attack, the yellow chevron will light up and tell you to put your nose up. Should you come in with too high of an angle of attack, the red chevron will light up and tell you nose down.

  • Instantaneous Angle of Attack indication.
  • Additional indication segments.
  • Three point calibration process, programmed on remote switch panel, to aircraft specific lift curve.
  • 16 different LED brightness levels from ultra dim to very bright.
  • Display has an imbedded photocell for daytime/nighttime brightness settings, choice of which is programmed at the display.
  • Audio output, tied to existing audio input on audio panel by others.
  • 4 different audio options to choose from which is programmed by the end user at the remote switch panel.
  • Audio mute switch with amber LED indicator located on remote switch panel.
  • 12-28 VDC input draws less than 0.250 Amps at full brightness.



The HUD is a self contained adjustable beam splitter adapter that mounts to the lip of the Eagle display and turns the Alpha System AOA into a true HUD. Intended for placement directly within the pilot’s peripheral vision. Allows for instantaneous viewing of AOA information exactly where needed. The HUD glass is an enhanced color correcting, anti-glare lens. Comes complete with mounting frame, bezel, display brackets and hardware.

  • Frame Dimensions: L: 4 1/8″, W: 1.250″
  • Bezel Dimensions: L: 4″ x W: 2.5″


  • Mounting Frame.
  • Dash Bezel.
  • Tinted Lens.
  • Custom Display Brackets.
  • Hardware.
  • HUD Cover with Flag.


Dual HUD Pressurized Kit Part #: DSTR-AOA-9600DPK-(HUD)



  • Two Eagle Displays

  • Switch Panel Module

  • Pressurized I/F Module

  • Sensor I/F Module

  • Dual Display I/F Module

  • Non Heated Standard Probe

  • 9×9 Probe Mounting Plate

  • Two HUD Adapters

  • Two HUD Covers

  • 6ft Power Cable

  • Two 6ft Display Extension Cables

  • 6ft Switch Panel Extension Cable

  • 15ft AOA Sensor I/F Module Exterior Cable

  • 15ft AOA Sensor I/F + Audio Interior Cable

  • 25 ft Blue Pneumatic Hose

  • 25 ft White Pneumatic Hose

  • Eagle Installation Manual

  • Eagle Operations Manual

  • Protractor

  • Probe Cover

  • Screwdriver



Complete Kit WeightLess than 3.00 lbs. 
Flush Mount HUD Frame DimensionsL: 4 1/8″, W: 1.250″
Flush Mount HUD Bezel DimensionsL: 4″ x W: 2.5″
AOA Interface Module sizeIn Inches: 5.75 x 2.60 x 1.65
System Voltage Requirements12 – 28 Volts DC
System Max Power Draw0.250 Amps
System Power Cable6 ft, three wires: power, ground and shield
Heated Probe Voltage Requirements12 or 24 VDC (must specify when ordering)
Heated Probe Power Draw86 Watts at 12VDC / 172 Watts at 24VDC
Heated Probe Current Draw8 Amps at 12VDC and 8 Amps at 24VDC
Heated Probe Power WireSupplied by others
Audio Output1 Volt P-P max at 300 ohm input impedance
Aux (Audio) Cable6 ft, three wires: AP audio, AP ground and shield
Audio OptionsFour
Mute SwitchYes, on switch panel
LED Brightness Levels16, from ultra dim to very bright
Photocell DiodeOn display, allows for custom daytime/nighttime brightness settings
Pressurized VersionYes


Request Quotation

    Shopping Cart