Falcon Above Dash HUD Kit

Angle of Attack Indicator, for precise and instantaneous lift alerts for your aircraft. Multi display kits available.

SKU: DSTR-AOA-9200K-(ADH) Categories: , , Tag:



The Falcon kit has a vertical light bar style display. With the vertical light bar display, when you come in for a landing you want to fly to the blue LED (on speed for landing). Should you come in with too low of an angle of attack, the display will illuminate into the yellow, telling you to put your nose up. Should you come in with too high of an angle of attack, the display will illuminate red, telling you to put your nose down. This kit comes with the Switch Panel Pre-Mounted in the Above Dash HUD (Heads Up Display) adapter kit.

  • Instantaneous Angle of Attack indication.
  • Three point calibration process, programmed on remote switch panel, to aircraft specific lift curve.
  • 16 different LED brightness levels from ultra dim to very bright.
  • Display has an imbedded photocell for daytime/nighttime brightness settings, choice of which is programmed at the display.
  • Audio output, tied to existing audio input on audio panel by others.
  • 4 different audio options to choose from which is programmed by the end user at the remote switch panel.
  • Audio mute switch with amber LED indicator located on remote switch panel.
  • 12-28 VDC input draws less than 0.250 Amps at full brightness.



The HUD is a self contained adjustable beam splitter adapter that mounts to the lip of the Falcon display and turns the Alpha System AOA into a true HUD. Intended for placement directly within the pilot’s peripheral vision. Allows for instantaneous viewing of AOA information exactly where needed. The HUD glass is an enhanced color correcting, anti-glare lens. Comes complete with mounting frame, base adaptor plate, dome, display brackets and hardware.

  • Frame Dimensions: L: 4 1/8″, W: 1.250″
  • Base Adaptor Plate: L: 4.613″, W: 2.780″
  • Dome: L: 4.251″, W: 2.407″, H: .960″


  • Mounting Frame.
  • Base Adaptor Plate.
  • Dome.
  • Tinted Lens.
  • Custom Display Brackets.
  • Hardware.
  • HUD Cover with Flag.


Falcon Above Dash HUD Kit Part #: DSTR-AOA-9200K-(ADH)



  • Falcon Display

  • Switch Panel Module

  • I/F Module

  • Non Heated Standard Probe

  • 9×9 Probe Mounting Plate

  • Above Dash HUD (Heads Up Display Adapter)

  • Above Dash HUD Cover

  • 6ft Power Cable

  • 6ft Display Extension Cable

  • 6ft AUX Cable

  • 6ft Switch Panel Extension Cable

  • 25 ft Blue Pneumatic Hose

  • 25 ft White Pneumatic Hose

  • Falcon Installation Manual

  • Falcon Operations Manual

  • Protractor

  • Probe Cover

  • Screwdriver



Complete Kit WeightLess than 3.00 lbs
AOA Interface Module sizeIn Inches: 5.75 x 2.60 x 1.65
System Voltage Requirements12 – 28 Volts DC
System Max Power Draw0.250 Amps
System Power Cable6 ft, three wires: power, ground and shield
Above Dash HUD Weight4.32 oz / 0.270 lbs
HUD Frame DimensionsL: 4 1/8″ x W: 1.250″
HUD Base Adaptor Plate DimensionsL: 4.613″, W: 2.780″
HUD Dome DimensionsL: 4.251″, W: 2.407″, H: .960″
Heated Probe Voltage Requirements12 or 24 VDC (must specify when ordering)
Heated Probe Power Draw86 Watts at 12VDC / 172 Watts at 24VDC
Heated Probe Current Draw8 Amps at 12VDC and 8 Amps at 24VDC
Heated Probe Power WireSupplied by others
Audio Output1 Volt P-P max at 300 ohm input impedance
Aux (Audio) Cable6 ft, three wires: AP audio, AP ground and shield
Audio OptionsFour
Mute SwitchYes, on switch panel.
LED Brightness Levels16, from ultra dim to very bright
Photocell DiodeOn display, allows for custom daytime/nighttime brightness settings
Pressurized VersionNo


Request Quotation

    Shopping Cart